Lenovo ThinkPad 360 Hardware Maintenance Manual Download

Page: 67 / 508

1100 Diskette Drive

1110 Hard Disk Drive

Battery Pack (1020)

Top Cover (1060)

Keyboard Unit (1080)

Steps 1, 2, 3, 4: Diskette Drive
Steps 5, 6: Hard Disk Drive

When Replacing

Before removing the hard disk drive, have the
user make a backup copy of all information
on the hard disk

Never remove the hard disk drive while the
system is operating or is in suspend mode.

Do not pull the hard disk cable. The cable can
be damaged if it is disconnected without
releasing the latch.

Do not drop or apply any shock or extra force to
the hard disk drive or diskette drive. They are
sensitive to physical shock.

Use the following table for reference when replacing parts.

Step

Location (Quantity)

Length

.1/

Diskette Drive (2)

8 mm

.5/

Hard Disk Drive (2)

6 mm

Note: Make sure you use the correct screw.

ThinkPad 340x (IBM 2610)

Summary of Contents for ThinkPad 360





























































































































































































































































































































































































































































































































Search results

Summary of Contents for ThinkPad 360

Reviews:

Related manuals for ThinkPad 360

Brands by name

Popular brands

Lenovo ThinkPad 360, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkPad 360

Reviews:

Related manuals for ThinkPad 360

Brands by name

Popular brands