Lenovo ThinkPad 360 Hardware Maintenance Manual Download Page 101

Page: 101 / 508

Symptom/Error

FRU/Action

Mouse and Pointing Stick
problems.

1. See “1080 Keyboard

Unit” on page 54
before replacing any
FRUs.

2. Disable Trackpoint and

test Mouse again. The
Trackpoint can
interfere with the
operation of some
Mouse devices.

3. Mouse

4. Keyboard Control Card

5. Keyboard

Cursor floats or moves
erratically.

1. See “TrackPoint II

Checkout” on
page 476 before
replacing any FRUs.

2. Mouse
3. Keyboard

External display problems.

1. See “External Display

Self-Test” on
page 470 before
replacing any FRUs.

  2. External Display
  3. Video Card
  4. System Board

Incorrect memory size
during POST.

1. See “Memory

Checkout” on
page 70 before
replacing any FRUs.

2. Base Memory Card
3. IC DRAM Card

System hang or Intermittent
hang.

1. See “Undetermined

Problem” on page 93
before replacing any
FRUs.

2. System Board

3. Hard Disk Drive
4. Replace the last device

being tested

5. Voltage Converter

The system goes into
suspend mode after the
POST.

1. System Board
2. Voltage Converter

3. Keyboard Control Card

The system does not
suspend or resume.

1. Check the

Suspend/Resume
switch operation. If
broken, replace the
Voltage Converter.

2. System Board
3. Voltage Converter

4. Keyboard Control Card

5. Keyboard

The computer does not
power-off.

1. Voltage Converter
2. System Board

ThinkPad 700, 700C, 720, 720C (9552)

Summary of Contents for ThinkPad 360





























































































































































































































































































































































































































































































































Search results

Summary of Contents for ThinkPad 360

Reviews:

Brands by name

Popular brands

Lenovo ThinkPad 360, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkPad 360

Reviews:

Brands by name

Popular brands