Lenovo ThinkPad 360 Hardware Maintenance Manual Download | Manualshive

Page: 415 / 508

background image

Note: Removing and installing the battery pack
during suspend mode should be done within one
minute. The resume operation must start. If the
resume operation does not work, switching of power
from the battery pack to standby battery will not be
correct. Replace the DC/DC card.

If replacing the DC/DC card does not resolve the
problem, replace the system board.

Power Management Features

Three power management modes are provided by the
computer to save power consumption and prolong battery
power.

Standby Mode:

When in standby mode the following

occurs:

The LCD backlight turns off.

The hard disk motor stops.

Events that cause the computer to enter the standby
mode.

Standby requested by the Fn key. (Fn

+

F3)

No activity under auto-standby enabled by the
feature utility.

Events that cause the computer to exit the standby mode
(resume).

Any key operation.

Suspend Mode:

When in suspend mode, the

following occur:

The LCD backlight turns off.

The LCD power is powered-off.

The hard disk is powered-off.

The CPU is stopped.

In the ThinkPad Features Program, the computer can be
set to “Will not suspend even if LCD is closed.”

When the computer is powered with ac power and is used
with one of the following IBM PC cards, the computer can
enter the

standby mode only. The PC card and application

program remain active.

3270 Emulation Credit Card Adapter

5250 Emulation Credit Card Adapter

Token-Ring 16/4 Credit Card Adapter

Credit Card Adapter for Ethernet

Events that prevent the computer from entering the
suspend mode.

While the communication link is running.

When a pointing device (except a serial mouse) are
selected in the Config menu of the Easy-Setup.

ThinkPad 755CE, 755CSE, 755CV, 755CX (9545)

405

«
...
413
414
415
416
417
...
»

Summary of Contents for ThinkPad 360





























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ThinkPad 360

Brand: Gateway Pages: 81

TravelMate 8200

Brand: Acer Pages: 98

TravelMate 800 Series

Brand: Acer Pages: 90

TravelMate 8100

Brand: Acer Pages: 92

TravelMate 8200

Brand: Acer Pages: 98

Brand: bto Pages: 308

Brand: Samsung Pages: 34

Brand: Samsung Pages: 78

Brand: Samsung Pages: 83

Brand: Samsung Pages: 128

MIL-BOOK 1000 Series

Brand: TAG Pages: 64

Brand: Sony Pages: 1

Brand: Sony Pages: 1

Brand: Sony Pages: 1

Brand: Sony Pages: 1

Brand: Sony Pages: 1

VAIO PCG-GRS150

Brand: Sony Pages: 12

Brand: Sony Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands