Diagnostic error code
FRU/Action
000-026-XXX
FLASH data error
1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
2. System board
000-027-XXX
BIOS Configuration/Setup error
1. Run Setup
2. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
3. System board
000-034-XXX
BIOS Buffer Allocation failure
1. Reboot the system
2. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
3. Run memory test
4. System board
000-035-XXX
BIOS Reset Condition detected
1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
2. System board
000-036-XXX
BIOS Register error
1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
2. System board
000-038-XXX
BIOS Extension failure
1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
2. Adapter card
3. System board
000-039-XXX
BIOS DMI data error
1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
2. System board
000-195-XXX
BIOS Test aborted by user
Information only Re-start the test, if necessary
000-196-XXX
BIOS test halt, error threshold exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
000-197-XXX
BIOS test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility” on page 41
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
000-198-XXX
BIOS test aborted
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility” on page 41
2. Flash the system and retest. See “Updating (flashing)
BIOS from a disc” on page 99
3. Go to “Undetermined problems” on page 64
000-199-XXX
BIOS test failed, cause unknown
1. Go to “Undetermined problems” on page 64
2. Flash the system and re-test
3. Replace component under function test
46
Hardware Maintenance Manual
Summary of Contents for ThinkCentre A58e
