Lenovo ThinkAgile HX Series User Manual Download Page 52

Page: 52 / 104

Figure 19. 3.5-inch hot-swap drive removal

After removing a hot-swap drive:

1. Install the drive filler or a new drive to cover the drive bay. See “Install a hot-swap drive” on page 48.

2. If you are instructed to return the old hot-swap drive, follow all packaging instructions and use any

packaging materials that are provided.

Install a hot-swap drive

Use this information to install a hot-swap drive.

Static Sensitive Device

Ground package before opening”

on page 45

Before installing a hot-swap drive:

1. If the drive bay has a drive filler installed, pinch the two tabs to remove the drive filler. Keep the drive filler

in a safe place.

Figure 20. 3.5-inch drive filler removal

2. Touch the static-protective package that contains the new drive to any unpainted surface on the outside

of the server. Then, take the new drive out of the package and place it on a static-protective surface.

User Guide for ThinkAgile HX1321 Node ThinkAgile HX3321 Node

Summary of Contents for ThinkAgile HX Series









































































































Search results

Summary of Contents for ThinkAgile HX Series

Reviews:

Related manuals for ThinkAgile HX Series

Brands by name

Popular brands

Lenovo ThinkAgile HX Series, User Manual

Search results

Summary of Contents for ThinkAgile HX Series

Reviews:

Related manuals for ThinkAgile HX Series

Brands by name

Popular brands