Lenovo ThinkAgile HX Series, User Manual

Page: 87 / 104

Figure 47. M.2 drive slot
1
Slot 0
2
Slot 1
Note: 480 GB M.2 drives are only supported on M.2 backplane with two M.2 drive slots.
To install the M.2 backplane and M.2 drive, complete the following steps:
Figure 48. M.2 drive installation
Step 1. Insert the M.2 drive at an angle of approximately 30 degrees into the connector.
Note: If your M.2 backplane supports two M.2 drives, insert the M.2 drives into the connectors at
both sides.
Step 2. Rotate the M.2 drive down until the notch 1 catches on the lip of the retainer 2 .
Step 3. Slide the retainer forward (toward the connector) to secure the M.2 drive into place.
Attention: When sliding the retainer forward, ensure that the two nubs 3 on the retainer enter the
small holes 4 on the M.2 backplane. Once they enter the holes, you will hear a soft “click” sound.
Chapter 8
.
Hardware replacement procedures
83