Lenovo System x3500 M4, Installation And Service Manual

Page: 238 / 1182

Step 2. Unlock and remove the left-side cover (see “Removing the left-side cover” on page 184).
Step 3. Remove the adapter (see “Removing an adapter” on page 213).
Step 4. Grasp the memory module and lift to remove it from the connector on the ServeRAID adapter.
Figure 137. Memory card removal
If you are instructed to return the server component or optional device, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Installing an optional ServeRAID adapter memory module
Use this information to install an optional ServeRAID adapter memory module.
Read the safety information in “Safety” on page v and “Installation guidelines” on page 35.
If you are replacing a server component in the server, you need to turn off the server and peripheral devices,
and disconnect the power cords and all external cables.
To install an optional ServeRAID adapter memory module, complete the following steps.
Step 1. Carefully turn the server on its side so that it is lying flat, with the cover facing up.
Attention: Do not allow the server to fall over.
Step 2. Unlock and remove the left-side cover (see “Removing the left-side cover” on page 184).
Step 3. Remove the ServeRAID adapter if necessary (see “Removing an adapter” on page 213).
Step 4. Touch the static-protective package that contains the memory card to any unpainted metal surface
on the server; then, remove the memory card from the package.
Step 5. Align the memory module with the connector on the ServeRAID adapter and push it into the
connector until it is firmly seated.
224
System x3500 M4 Installation and Service Guide