Lenovo HR630X V2, User Manual

Page: 60 / 134

S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the electrical
current supplied to the device. The device also might have more than one power cord. To remove all electrical
current from the device, ensure that all power cords are disconnected from the power source.
S001
DANGER
Electrical current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
• Connect all power cords to a properly wired and grounded electrical outlet/source.
• Connect any equipment that will be attached to this product to properly wired outlets/sources.
• When possible, use one hand only to connect or disconnect signal cables.
• Never turn on any equipment when there is evidence of fire, water, or structural damage.
• The device might have more than one power cord, to remove all electrical current from the
device, ensure that all power cords are disconnected from the power source.
Safety precautions on DC power supplies
CAUTION:
240 V DC input (input range: 180-300 V) is supported in Chinese Mainland ONLY.
Perform the following steps to safely remove the power cord of one 240 V DC power supply unit. Otherwise,
there can be data loss and other damages to the equipment. Damages and losses resulting from inappropriate
operations will not be covered by the manufacturer’s warranty.
1. Turn off the server.
2. Disconnect the power cord from the power source.
3. Disconnect the power cord from the power supply unit.
52
HR630X V2 User Guide