Lenovo HR630X V2 User Manual Download Page 26

Page: 26 / 134

Rear view LEDs

The rear of the server provides system ID LED, Ethernet LEDs, and power supply LEDs.

Server rear view LEDs

The following illustration shows the LEDs on the rear view of server model with two PCIe slots. The LEDs on
the rear view of other server models are the same.

Figure 4. Rear view LEDs

Table 8. LEDs on the rear view of the server

Ethernet link LED

Ethernet activity LED

Power input LED

Power output LED

Power supply error LED

System ID LED with button

Ethernet link LED

Ethernet activity LED

The BMC network connector has two status LEDs.

Ethernet status LED

Color

Status

Description

Ethernet link LED

Green

Network link is established.

None

Off

Network link is disconnected.

Ethernet activity LED

Green

Blinking

Network link is connected and active.

None

Off

The server is disconnected from a LAN.

HR630X V2 User Guide

Summary of Contents for HR630X V2







































































































































Search results

Summary of Contents for HR630X V2

Reviews:

Related manuals for HR630X V2

Brands by name

Popular brands

Lenovo HR630X V2, User Manual

Search results

Summary of Contents for HR630X V2

Reviews:

Related manuals for HR630X V2

Brands by name

Popular brands