Lenovo 7515L2U, Hardware Maintenance Manual

Page: 72 / 292

Diagnostic error code FRU/Action
015-198-XXX
USB port test aborted
1. If a component is called out, make sure
it is connected and/or enabled. See
Chapter 6, “Using the Setup Utility
program,” on page 51
2. Flash the system and re-test. See
“Updating (flashing) BIOS from a disc”
on page 278
3. Go to “Undetermined problems” on page
81
015-199-XXX
USB port test failed, cause unknown
1. Go to “Undetermined problems” on page
81
2. Flash the system and re-test. See
“Updating (flashing) BIOS from a disc”
on page 278
3. Replace component under function test
018-000-XXX
PCI (Peripheral Component Interconnect)
Card Test Passed
No action
018-0XX-XXX
PCI Card Failure
1. Riser card, if installed
2. System board
018-195-XXX
PCI Card Test aborted by user
1. PCI card
2. Information only
Re-start the test, if necessary
018-196-XXX
PCI Card test halt, error threshold exceeded
1. Press F3 to review the log file
2.
Re-start the test to reset the log file
018-197-XXX
PCI Card test warning
1. Make sure the component that is called
out is connected and/or enabled. See
Chapter 6, “Using the Setup Utility
program,” on page 51
2. Re-run test
3. Replace the component that is called out
in warning statement
4. Replace the component under test
018-198-XXX
PCI Card test aborted
1. If a component is called out, make sure
it is connected and/or enabled. See
Chapter 6, “Using the Setup Utility
program,” on page 51
2.
Flash the system and re-test. See
“Updating (flashing) BIOS from a disc”
on page 278
3.
Go to “Undetermined problems” on page
81
018-199-XXX
PCI Card test failed, cause unknown
1. Go to “Undetermined problems” on page
81
2. Flash the system and re-test. See
“Updating (flashing) BIOS from a disc”
on page 278
3. Replace component under function test
66
Hardware Maintenance Manual