Lenovo 6431 Hardware Maintenance Manual Download Page 85

Page: 85 / 284

Installing the upper bezel

To install the upper bezel, complete the following steps:

1. Insert the two tabs on the right-side of the upper bezel into the corresponding

holes on the right side of the chassis.

2. Rotate the upper bezel to the left side of the chassis until the bezel clips

are

aligned with the corresponding indentations on the left side of the chassis and it
snaps into place.

3. Install the lower bezel (see “Installing the lower bezel” on page 65).

4. Install the side cover (see “Installing the side cover” on page 63).

5. Lock the side cover.

6. Reconnect the external cables and power cords; then, turn on the attached

devices and turn on the server.

Chapter 4. Removing and replacing server components

Summary of Contents for 6431





























































































































































































































































































Search results

Summary of Contents for 6431

Reviews:

Brands by name

Popular brands

Lenovo 6431, Hardware Maintenance Manual

Search results

Summary of Contents for 6431

Reviews:

Brands by name

Popular brands