Lenovo 1706KEU - ThinkPad X60 1706, Troubleshooting Manual

Page: 40 / 72

(DRAM) unbuffered small outline dual inline memory module (SO-DIMM),
available as an option, in the memory slot of your computer. SO-DIMMs with
different capacities are available.
Note: Use only the memory types supported by your computer. If you
incorrectly install the optional memory or install an unsupported
memory type, a warning beep will sound when you try to start the
computer.
To install an SO-DIMM, do the following:
1. Touch a metal table or a grounded metal object. This action reduces any
static electricity in your body, that could damage the SO-DIMM. Do not
touch the contact edge of the SO-DIMM.
2.
Turn off the computer ; then disconnect the ac adapter and all cables
from the computer.
3. Close the computer display, and turn the computer over.
4. Remove the battery.
5.
Loosen the screws that hold the memory-slot cover in place
1
; then
remove the cover
2
.
6.
If two SO-DIMMs are already installed in the memory slot, remove one
of them to make room for the new one by pressing out on the latches on
both edges of the socket at the same time. Be sure to save it for future
use.
Replacing memory
32
ThinkPad
®
X60 Service and Troubleshooting Guide