Lennox INNOV DM R Series, Application Manual

Page: 79 / 106

INNOV@ CENT -AGU-0912-E . 3 .
1 General Description
INNOV@ DM “CCAC” self-contained units are specially designed for installation in technological environments
such as Computer rooms, laboratories and in general where a high precision in climate control and a 24h/day
operation are requested. INNOV@ units represent the state of the art between technology and design as well as
all our products: thanks to their characteristics, INNOV@ can be installed also in offices where people are
working. The depth of 449 mm for ”C” versions, allows the compatibility with standard offices furniture:
furthermore the innovative design and the high tech selected colours make INNOV@ units complementary to the
last generation of IT devices. The internal design of the units in firstly made looking to efficiency and reliability but
don’t loosing accessibility: all components, including e-heaters, fans, compressors, valve, etc. can be maintained
from the front and furthermore the door(s) are dismountable in just a few seconds thanks to an innovative hinge:
this is very important when units are installed in small corridors. The exclusive use of primary brands
components and a fully integrated development process (CAD + CAM, CAE) stands for highest possible quality
level regarding efficiency, reliability, maintenance time, pre and after sales support. All DX units are available only
in single circuit.
Fig. 1 DX version (Down / Up)
1 Filter 8 Centrifugal fan
2 Electrical heaters 9 Thermostatic valve
3 Safety valve 10 Compressor
4 Liquid receiver 11 Sight glass
5 Humidifier 12 “Rotalock” valve
6 Microprocessor control 13 Filter dryer
7 Electrical panel
DMADC unit
(Down-flow)
DMAUC unit
(Up-flow)
12
11
10
9
8
7
6
1
2
3
4
5
13
12
11
10
9
7
6
13
8
2
3
4
5
1