Mounting a LEMKEN Solitair seed drill
83
13.2.2 Adjusting the working depth
The wheelmark eradicators are set to ap-
prox. 5 cm deeper than the bout of the
tractor.
Adjust the working depth of the wheelmark
eradicator as follows:
Raise the implement to relieve the load-
ing on the wheelmark eradicator (1).
Release the guide pin (5).
Hold the wheelmark eradicator (1) with
the hand.
Pull the guide pin (5) out of the holder
(5).
Move the wheelmark eradicator (1) to
the desired position.
Fix the wheelmark eradicator in place in
the holder (4) again using the guide pin
(5).
Lock the guide pin (5).
5
4
1
