Mounting a LEMKEN Solitair seed drill
80
13.1 Track
markers
CAUTION
Before operating the track markers, always make sure that no
persons are present in the danger zone.
13.1.1 Adjusting the penetration depth
For a more precise access run when com-
bined with a seed drill, track markers are
available that can be bolted to the console
(2). The track markers (1) are hydraulically
actuated.
To adjust the penetration depth of the track
markers (1), proceed as follows:
Release the clamping bolts (4).
Adjust the length of the track marker
arms (5) and
the angle of the track marker discs.
The adjusting dimensions are available
in the following table. The dimensions
refer to a marking groove in the centre of
the tractor track.
After the adjustment:
Firmly retighten the corresponding
clamping bolt (4) to 276 Nm.
1
4
5
2
5
