Operation
68
11.4.3 Blade rollers
CAUTION
Loss of components
If the guide pins are not secured, they can fall out due to vibra-
tions during operation.
The guide pins must always be secured by split rings.
Working depth of blades
The working depth of the blades (6) is ad-
justed using the guide pins (3) as follows:
Rotate the spindles in a clockwise direc-
tion until the guide pins (3) are relieved.
Release and remove the guide pins (3)
above the support plate (1).
Move the supporting arms (4) to the de-
sired position using the spindles (2).
Insert the guide pins (3) into one of the
free holes on the supporting arms (4).
Secure the guide pins (3) with split rings.
Rotate the spindles (2) in a counter-
clockwise direction somewhat to relieve
them.
2
1
4
3
6
