Attaching the implement
47
Connect the hydraulic hoses to the trac-
tor in accordance with the table in the
section »Hydraulic equipment required,
page
Fehler! Textmarke nicht
definiert.
«.
Connect the electrical cables to the trac-
tor in accordance with the table in the
section »Power sources required, page
39«.
Now reverse right up to the implement
and connect the lower links of the tractor
to the cross shaft.
Secure the cross shaft with the safety
device (2). See also the tractor manufac-
turer's operating instructions.
Connect the top link with the headstock
using the top link pin.
The top link position also pre-sets the pressure on the rollers and
therefore the degree of soil crumbling and reconsolidation. See
»Pressure load on rollers - penetration characteristic, page 70 «.
Secure the top link pin (3) with a linch
pin.
Lighting equipment must also be fitted to the implement if it is
necessary to drive on public roads in order to reach the field.
2
3
