LEMKEN EurOpal, Operating Manual

Page: 9 / 69

Safety Instructions
7
1 SAFETY INSTRUCTIONS
General Safety Instructions

Before using the machine, always check both it and the tractor for roadworthi-
ness and operational safety!

As well as the notes in these instructions the operator is advised to comply with
the generally applicable safety at work regulations and those relating to use of
the public highway!

When driving on public roads with a raised machine the lifting control lever
should be locked against unintentional lowering!

The fitted warning and advisory plates give important information for safe op-
eration; adhering to these increases your own security!

When using public roads adhere to applicable traffic rules!

The operator should familiarise him-/herself with all controls and their functions
before starting work. During work could be too late!

The clothing of the operator should fit tight. Avoid wearing any loose clothing!

To avoid danger of fire keep the implement clean!

Before beginning to drive check surroundings area (children)!

Sitting or standing on the implement during operation or during transport is not
permissible.

Attach implements as advised and only to the stipulated positions!

Special care should be taken when the implement is coupled to or uncoupled
from the tractor.

When coupling or uncoupling the implement bring the supporting stands into
the corresponding position (standing safety)!

Fit weights only to the fixing points provided for that purposes!

Adhere to the maximum permissible axle loads, total weights and transport
width!

Fit and check transport gear, road lights and warning guards!