LEMKEN EurOpal, Operating Manual

Page: 22 / 69

Use
20
4.9 Three Point Attachment
4.9.1 General Instructions
The category of the three point linkage must be the same with the implement as
well as with the tractor. If there is no correspondence, either the three point
linkage of the tractor must be adapted or the drawbar (1) and if required the top
link pin must be replaced by a corresonding version.
The ma ximum all o we d t rac tor p o we r and meas urements ac cori ng to to ISO 730 -
1 can be learned from the following table.
Traktor Power Cat.
Diameter of
the pivot of
the draw-
bar, mm
Length of
the drawbar,
mm
(collar dis-
tance)
Distance
of the trac-
tor lower
links, mm
Distance between
drawbar and the
point of intersec-
tion of the lower
links, mm
kW HP A B C D
up to 48 bis 65 I 22 683 370 - 505 1700 - 2400
up to 92 bis 125 II 28 825 390 - 505 1800 - 2400
80 - 185 109 - 251 II / III 36.6 825 390 - 505 1800 - 2400
80 - 185 109 - 251 III 36.6 965 480 - 635 1900 - 2700
150 - 350 204 - 476 III / IV 50.8 965 480 - 635 1900 - 2700
150 - 350 204 - 476 IV 50.8 1166 480 - 660 1900 - 2800