2 MOUNTING BEHIND THE TRACTOR
- Adjust the tractor lever arms at equal height.
- Fit the lever arms to the linkage pins (Cat. II) of the
headstock.
- Lift the headstock so far that the position of the drawbar is
horizontal.
- Pull up the parking jack (fig. 3).
- Secure the tractor’s lever arms by means of stabilisation
chains or rods eliminating any side sway of the headstock.
- Check if the PTO shaft telescopes smoothly.
- Fit the PTO shaft to the tractor PTO shaft.
At first assembly or use of another tractor: check the
minimum and maximum overlap of the PTO halves.
• Fit the safety chain of the protection tube to a rigid part
of the tractor.
• Leave the PTO shaft in the catch hook if the safety
shields have been removed from the machine’s sides for
transport purposes.
The PTO shaft is only allowed to be fitted to the PTO if
the two safety shields (fig. 8) are fitted to the sides of the
machine.
- Connect the two hydraulic hoses of the ram for drawbar
adjustment to a double acting hydraulic spool valve on the
tractor.
- Connect the hydraulic hose for lifting the mower con-
ditioner to a single acting hydraulic spool valve which has
a floating position.
*
Consult the instruction supplied with the PTO shaft.
35
3
4
!
5
