LELY DISCOVERY 90 S, Operator'S Manual

Page: 103 / 138

5.4002.8501.0
B
Maintenance 6-11
Heavy parts.
Risk of personal injury.
Use suitable lifting or tilting equipment.
1. Use a suitable lifting or tilting tool to lift the front of the machine and put the vehicle on its rear.
Figure 46. Remove the sliding disk
KEY: 1. Sliding disk - 2. Nut M10 - 3. Coach bolt M10
2. Remove the nuts (2), coach bolts (3) and the
sliding disk (1).
3. Install the new sliding disk (1) with the bolt (3)
and the nut (2).
Close-up
1. Use a suitable lifting or tilting tool to put the machine back onto its wheels.
2. Switch on the machine (see Switch ON the Machine on page 5-4).
3. Open the Lely Control app on the smartphone.
4. Push .
During the calibration process you must not move the machine.
5. Push soft button Yes to start the gyroscope calibration process.
6. Wait until a beep is heard (about 5 minutes) to confirm that the calibration is complete.
7. Drive the Machine to the Charging Station (see page 5-7).
8. Start the time path to put the machine into operation (see Start or Stop the Time Path on page 5-33).
in n o vato rs in ag ric u ltu re