Lelit PGAUTO5NEW, Manual

Page: 10 / 24

Pag. 10
English
COMPULSORY:
1. Use only normal water.
2. Empty the boiler once a week, making sure that the unit is shut off and that the boiler pressure is not over 0
ATM (fig. 1: manometer). For carrying out this operation, open exhaust tap slowly (fig. 5: discharge tap).
During this operation wear appropriate gauntlets according to the laws in force, in order to avoid burnings.
3. Never leave the hot iron on the ironing board.
4. Connect PGAUTO5NEW to suitable protected plug.
5. After finishing ironing, switch PGAUTO5NEW off and close the water tap; remember to open the water tap
before switching on the machine again (only for the units connected to the water mains).
6. Always keep children away from PGAUTO5NEW, both when it is on and off.
7. Make sure that during cold season the tubes that connect PGAUTO5NEW to water supply do not freeze.
8. Do not add additives to the water.
9. The standard and extraordinary maintenance must be carried out by authorized personnel and all the
components must be replaced only with original spare parts.
IRONING OPERATION:
1. Run the iron on garments, pressing the steam button (fig. 4) at regular intervals. For a better result,
position the iron thermostat (fig. 3) on “cotton”.
2. For delicate garments, we advise you to use an anti-sheen/teflon shoe.
3. During the ironing operation, pay attention to the position of iron cables: if they twine or get in touch with
the ironing board, they might cause short circuits (fig. 3).
4. For dry ironing it is possible to adjust the thermostat (fig. 3.) on different positions according to the type of
fabric (read the
WATER LEVEL PROBE CLEANING PROCEDURE:
We recommend you to clean the water level probe once a week with a wet cloth, not with chemicals. This
cleaning operation must be carried out ONLY by authorized personnel. Please follow the cleaning instructions as
indicated below: