Lektro-Vend Combo Series Service Manual Download | Manualshive

Page: 24 / 93

background image

LANGUAGE SELECTION

To select the message language, while in the service mode, press selection button

The scrolling display

will display “LANGUAGE”. Press the letter of the language you wish to program ( See list below). The
language selected will be displayed, or you can program your own message using button

1.

Press button

+ button A = Italian

Press button

+ button B = Dutch

Press button

+ button C = Spanish

Press button

+ button D = Danish

Press button

+ button E = English

Press button

+ button F= French

Press button

+ button G = German

Press button

+ button 11 = ADD MESSAGE

Under selection button 11, the control board will display “MESSAGE 1”. Using the same overlay for the Point

of Sale Programming, enter the first message PLEASE INSERT EXACT MONEY in the language desired,
then press SHIFT, then press ENTER. Next enter PLEASE INSERT MORE MONEY in the language you
desire. Then press SHIFT, then press ENTER. Enter MAKE ALTERNATE SELECTION in the desired

language then press SHIFT, then press ENTER. Now enter the message PLEASE CALL SERVICE in the
language desired. Then press SHIFT, the press ENTER. The maximum length of messages one and two
are thirty (30) characters each. The maximum length of messages three andfouristwentyfive (25) characters.

Note: This feature will only translate these:

PLEASE INSERT MORE MONEY, MAKE ALTERNATE

SELECTION, PLEASE INSERT EXACT MONEY and PLEASE CALL SERVICE.

VEND OPTIONS

To enable or disable the vend options, while in the service mode, press selection button

1.

The control

board will display “OPTIONS”. Press one of the appropriate letters listed below. After the letter has been
pressed, the current state of the option will be displayed. The option may be changed by following the
instructions pertaining to that option.

Bill Escrow (if it is a feature of the bill validator installed).

This option will allow the last bill accepted to be escrowed, provided the bill validator is capable of such

a feature. To access this, while in the service mode, press selection button

then press selection button

“A”. The feature will be displayed with its present status. To change the status press selection button

B. Forced Vend

This option (when turned “ON”) will force the customer to complete

a

purchase once they have deposited

money of any form. If a vend is attempted and the motor fails during this vend, the customer will be allowed

to escrow the credit, regardless of the force vend status. To access this option, press selection button

1

then press selection button :B:. The feature will then be displayed with its present status. To change the status
press selection button

again.

«
...
22
23
24
25
26
...
»

Summary of Contents for Combo Series






























































































Reviews:

No comments

Related manuals for Combo Series

Brand: Necchi Pages: 60

Brand: Janome Pages: 45

Brand: Janome Pages: 32

GPS/F-1006 Series

Brand: Garudan Pages: 114

Brand: Janome Pages: 63

Brand: zika Pages: 21

Brand: Husqvarna Viking Pages: 48

Brand: Brother Pages: 20

Brand: Brother Pages: 40

Brand: Brother Pages: 2

Brand: Brother Pages: 72

Brand: Brother Pages: 92

Brand: Brother Pages: 52

Brand: Brother Pages: 107

Brand: Brother Pages: 106

Brand: Brother Pages: 122

Brand: Brother Pages: 106

Brand: Brother Pages: 100

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands