Use this device only for its intended purpose as
described in this Owner’s Manual.
Î
This unit is not approved or tested for marine use.
Î
This unit is not approved or tested for aviation use.
Î
This unit is not approved or tested for use in explosive or corrosive environments.
Î
This unit is not approved for surgical or medical use. This unit is not approved for
use in a life support unit, its derivatives or associated products.
Î
This unit is not designed for use where human life may be threatened by
malfunctions of the unit. Under no circumstances should this unit be used to monitor,
observe or interact with a system or process on which human life is maintained or
interacted with, in any life threatening manner.
Î
Do not mount the unit directly over or near any output of a heating or cooling
appliance.
Î
Do not store anything directly on top of the unit’s surface when the unit is in
operation.
Î
Do not operate this unit if it has a damaged power cord or plug, if it is not working
properly, or if it has been damaged or dropped. If the power cord is damaged, it must
be replaced by Leivio Technologies Inc. or an authorized service agent using a power
cord available from Leivio Technologies, Inc.
Î
Do not cover or block any openings on the unit.
Î
Use this appliance only for its intended use as described in this manual. Do not use
corrosive chemicals or vapors near this unit.
Î
This product is specifically designed to encode video to IP traffic, and is not
intended for laboratory or medical use.
Î
Do not store this appliance outdoors. Do not use this product near water—for
example, in a wet basement, near a swimming pool, near a sink or not mount this unit
in a high humidity environmental location.
Î
Keep power cord away from heated surfaces.
Î
This unit must only be serviced by the manufacturers qualified service personnel.
Contact nearest authorized service facility for examination, repair or adjustment.
Î
As with any product, close supervision is necessary when used by children.
2