Configuring Step Three
Now to set the encoder device’s IP values;
Figure 5 Initial IP address entry screen
The first menu item asks for the IP address you want this unit to have, the second
menu item the sub-net mask, and the third the gateway address. Those are pretty
straightforward.
Figure 6 – Enter the address with periods separating three digit entries
You just enter them like normally with a period separating the four blocks of three
digits each (XXX.XXX.XXX.XXX) after you select the IP address hit enter and that
data will be buffered on the encoder, ready to be written into memory.
The fourth menu item asks for the target decoder. This is for companies wanting point
to point communication where the receiver is a decoder Leivio made, a Personal
computer, or a store and forward device. In point to point communication, you define
the end point IP address.
14