15
6.4 How to program PIN-Code
You can change remote access PIN-code as follows:
1.
Slide
function switch
to PROG
2.
Press
#
.
You can prevent the alarm unit from unintended programming by pressing
*
.
3.
Enter desired PIN-code (4 to 7 digits!)
4.
Press
#
.
5.
Re-enter PIN-code for confirmation
6.
Press
#
.
If PIN-code is re-entered correctly it will be announced. If you selected program locking the additional
message „programming inactive: PIN” will be announced. In case of an incorrect programming the message
announced „Error“ will not be stored => old PIN-code remains active.
7. Slide function switch to OFF
6.4.1 Lock program mode
If you initiated programming new PIN-Code with key
*
the program mode is locked unless you unlock by re-entering
PIN-code. This feature prevents from unintentional reprogramming during operation.
6.4.2 Unlock program mode
Having the programming blocked as described in section 6.4.1, you can unlock as follows:
1.
Slide
function switch
to PROG
Message „Programming inactive: PIN“ will be announced
2.
Enter PIN-code and press
#
.
By entering correct PIN-code you will hear a confirmation beep, otherwise message „Error“
3.
Slide function switch to OFF