42
Period of time
(operating hours)
Monitoring and maintenance work
Spare parts
Tools
After each use of the
device
Visual inspection, cleaning of
hot
wedge (15), drive/pressure rollers
(9/11) and contact system (13/14)
–
Brass brush
Every 100 hours
Lubricate chains
–
Interflon Fin
Grease
Every 1000 hours
Check the drive, contact your distributor
Engine or gear-
box, chains
according to
repair instructions
Recommended maintenance intervals for the device:
• Maintaining the service intervals allows you to achieve a longer service life of your appliance.
• If the maintenance intervals are not observed, reliable welding is not guaranteed.
• Repairs must only be carried out by authorized Leister service centers.
• Do not use any aggressive cleaning agents or solvents to clean the device.
• Leister service centers guarantee a professional and reliable repair service with original spare parts.
• You can find more information at
.
The device must be cooled down and the main switch must be switched off for maintenance of the
device. The power cord must have been disconnected from the power supply.
There may be a risk of injury from sharp edges due to possible material damage to the device due to
corrosion or wear.
Risk of crushing and shearing
When operating the clamping lever and clamping arm, there is a risk of injury to the hand. Always hold
the hot wedge welding machine by the handles and control units provided.
16. Maintenance COMET 700/500
