25
• The drive speed is blocked during welding.
• Pressing the
e-drive (27)
briefly unlocks the drive speed.
• Hold the
e-drive (27)
down for 5 seconds.
• The values of the day distance and the total distance are now shown in the speed display.
• Briefly pressing the
e-drive (27)
causes the speed to be shown again in the
working display (29)
.
• After leaving the day distance display, the drive speed is blocked again.
• Use the
Up (22)
and
Down (23)
arrow keys to
position the cursor on the speed in the
working
display (29).
• Hold the
e-drive (27)
down for 5 seconds.
• The values of the day distance and the total dis-
tance are now shown in the drive speed display.
• Briefly pressing the
e-drive (27)
causes the speed
to be shown again in the
working display (29)
.
1 ×
5 sec
In welding operation
As soon as the drive is switched on and more than 100N force is displayed in the
working display (29),
the
recording of the welded distance begins. You can call up the day distance as follows:
Only available with advanced functions Advanced Mode.
This function can be used to reset all of the individually set values back to the factory settings.
Caution:
Resetting will affect both your settings and the deletion of your recipes.
1. Activate and confirm Advanced functions [see Advanced functions (Advanced Mode) [8.5]]
2. Select and confirm Reset to defaults [Menu selection,
e-drive (27)
]
3. Select and confirm symbol Reset [
Function display (28),
e-drive (27)
]
Only available with advanced functions Advanced Mode.
Your COMET 700 has the Leister Quality System (LQS) and thus the function of welding data recording. Using
the LQS and myLeister app, the COMET 700 records the drive speed, the hot-wedge temperature and the joining
force during welding over the welding seam length at the specified distance interval. You can find more informa-
tion in the corresponding operating instructions LQS/myLeister at
8.14. Day distance display
8.13. Reset (Reset to defaults)
8.12. Welding data recording and WLAN settings WLAN settings
