manualshive.com logo in svg

Leica V-LUX 4, Instructions Manual

Share
Download
Leica V-LUX 4 Instructions Manual Download Page 200

- 200 -

Others

•

Is the camera connected to the computer correctly?

•

Is the camera recognized by the computer correctly?

>

Set to [PC] in [USB Mode]. 

(P62

, 

174)

>

Turn the camera off and on.

>

Disconnect the USB cable. Connect it again while the card is inserted in the camera.

>

If there are two or more USB terminal on a single computer, try connecting the USB cable to 
another USB terminal.

>

Check if your computer is compatible with SDXC memory cards.

>

A message prompting to format the card may be displayed when connecting, but do not format.

>

If the [Access] displayed on the monitor does not disappear, disconnect the USB cable after 
turning the camera off.

•

Pictures cannot be printed using a printer which does not support PictBridge.

>

Set to [PictBridge(PTP)] in [USB Mode]. 

(P62

, 

178)

>

When using a printer with a cropping or borderless printing function, cancel this function before 
printing. (For details, refer to the operating instructions for the printer.)

>

When you order photo studios to print pictures, ask the photo studio if the pictures can be printed 
with both ends.

•

Since aspect ratio of a panorama picture differs from normal pictures, it may not always be possible 
to print it correctly.

>

Please use a printer that supports panorama pictures. (For details, please see the operating 
instructions of your printer)

>

We recommend using the available software to adjust the size of the still picture to the print 
paper size.

Cannot communicate with the computer.

The card is not recognized by the computer. (The internal memory is recognized.)

The card is not recognized by the computer. (SDXC memory card is being used)

The picture cannot be printed when the camera is connected to a printer.

The ends of the pictures are cut at printing.

The panorama picture is not printing correctly.

Summary of Contents for V-LUX 4















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands