- 178 -
Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to be
printed out and instruct that printing be started on the camera’s monitor.
•
Picture series will be displayed as a list, and not as a group.
•
Some printers can print directly from the card removed from the camera. For details, refer to the
instructions of your printer.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the internal memory.
Perform the print quality and other settings at the printer before printing the pictures.
1
Connect the printer and camera with the supplied USB cable.
2
Press
3
/
4
to select [PictBridge(PTP)], and then [MENU/SET].
Notes
•
Use a battery with sufficient capacity. If the remaining battery power becomes low while the camera
and the printer are connected, the status indicator flashes and the alarm beeps. If this happens
during printing, stop printing at once. If not printing, disconnect the USB cable.
•
Do not disconnect the USB cable while [
å
] (Cable disconnect prohibit icon) is displayed.
(may not be displayed depending on the type of printer used)
•
Before inserting or removing a card, turn the camera off, and disconnect the USB cable.
•
Motion pictures recorded cannot be printed out.
•
Make sure the plugs are aligned correctly and that they are inserted straight. (Otherwise the
connectors may be bent out of shape which may cause trouble.)
•
Do not use any other USB cables except the supplied one. Use of cables other than the
supplied one may cause malfunction.
A
USB cable
B
Align the marks, and insert.
