Leica mojo3D, User Manual

Page: 38 / 272

38
Leica mojo3D, Running the mojo3D for the First Time
• Use the on-screen keyboard to enter the measurement, tap to continue.
• Repeat for the other measurements required.
3. After you have entered all required vehicle measurements, add any required
implements on the same screen. If no implements are required, tap to
continue.
Implement setup,
step-by-step To add an implement carry out the following steps:
3. Enter the measurements required for the implement type that you have selected.
• Tap on a field. The on-screen keyboard appears.
• Use the on-screen keyboard to enter data, tap to continue.
• Repeat for all measurements required.
1. On the vehicle setup screen, tap .
An implement button appears in the bar at the top of the screen
and the list of implement types are shown.
2. Tap the implement type in the list at the left of the screen. Tap and
to reveal more options.