background image

8

Version 1.5, Revision H 

Safety

2

2. 

Safety

Warning 

The safety and caution notes in this chapter must be observed at all times.
Be sure to read these instructions, even if you are already familiar with the operation and use of other 

Leica products.

2.1 

Safety instructions

These Instructions for Use include important instructions and information related to the operating safety 
and maintenance of the instrument.

In order to maintain this condition and ensure safe operation, the operator must observe all the 
instructions and warnings contained in this instruction manual.

This instrument has been built and tested in accordance with the safety requirements for electrical 
equipment for measurement, control, and laboratory use.

To maintain this condition and ensure safe operation, the user must observe all notes and warnings 
contained in these Instructions for Use.

Note 

These Instructions for Use must be appropriately supplemented as required by the existing 

regulations on accident prevention and environmental safety in the operator's country.

Warning 

•  The protective devices located on the instrument and the accessories must not be removed or 

modified. Only service personnel qualified by Leica may repair the instrument and access the 

instrument's internal components.

•  Use only the provided power cable – this must not be replaced with a different power cable.  

If the power plug does not fit in your socket, contact our service.

Residual risks

•  The instrument has been designed and constructed with the latest state-of-the-art technology and 

according to recognized standards and regulations with regard to safety technology. Operating or 

handling the instrument incorrectly can place the user or other personnel at risk of injury or can 

cause damage to the instrument or other property. The instrument may be used only as intended 

and only if all of its safety features are in proper working condition. Malfunctions that impede 

safety must be remedied immediately.

Note 

For current information about applicable guidelines, please refer to the CE declaration of conformity 

and on our Internet site at:

http://www.LeicaBiosystems.com

Summary of Contents for EG F























Reviews: