Leica EG F, Instructions For Use Manual

Page: 16 / 22

16 Version 1.5, Revision H
Instrument Characteristics
4
4.2 Instrument components/functions
Fig. 9
10
8
9
The control panel on the front side of the control unit consists of a membrane keypad with push buttons
( → Fig. 9- 9 ) , a single-line display ( → Fig. 9- 8 ) and an LED ( → Fig. 9- 10 ) which flashes yellow during the
warm-up phase. If the preselected operating temperature is reached, this indicator lights permanently,
thereby signaling its readiness.
Temperature display
Two options are available for selecting the temperature display:
• Temperature in °C
• Temperature in °F
Changing the temperature unit
• Switch off mains switch of the control unit.
• Switch on the control unit WHILE HOLDING the key pressed.
Changing the temperature
• Change the temperature value by pressing the or key.
Warning
Important!
The forceps holder will become hot. Risk of burning!