Leica EG F, Instructions For Use Manual

Page: 11 / 22

11 Leica EG F
Installation
3
Necessary assembly work
Fig. 4
1
2
3
Proceed as follows to make the instrument ready for use:
• Forceps holder (
→
Fig. 4- 1 ) with paraffin collecting tray (
→
Fig. 4- 2 ) is factory-installed on the
right side.
If it needs to be installed on the left hand side, follow these steps:
1. Loosen the four Phillips screws ( → Fig. 4- 3 ) on the bottom of the instrument.
2. Remove forceps holder/collecting tray, reverse it and fasten it to the opposite side (insert
screws in corresponding holes on opposite side).
3.2 Standard delivery
Qty. Part No.
1 Base unit 14 0388 35824
1 Control unit with voltage selector switch,
100 - 120 / 220 - 240 V / 50 - 60 Hz
1 Screw-on tweezer holder for installation on the control unit
1 Screw-in heatable forceps with spiral cable
1 Set of fuses (2x T1.25 A L250 V)
1 Instructions for Use printed (English, with
Language CD 14 0388 83200
14 0388 83001
The country specific power cord needs to be ordered separately. Please find a list of all power cords
available for your device on our website www.LeicaBiosystems.com within the product section.