Leica EG F, Instructions For Use Manual

Page: 14 / 22

14 Version 1.5, Revision H
Installation
3
Connecting the power cord
• Before connecting the power cord, ensure that the mains switch (
→
Fig. 6- 1 ) to Off = 0.
• From the cable set, select the power cable with the plug suitable for your power socket.
Warning
The instrument must be connected to mains only with the supplied power cord and only to a
grounded socket.
• Connect the plug of the power cord to the connecting socket ( → Fig. 6- 3 ) on the rear of the control
unit.
• Connect the plug of the power cord to the power socket.
Replacing fuses
Warning
Switch the instrument off and unplug it. Use only the supplied replacement fuses.
• Insert a small screwdriver into the cutout ( → Fig. 6- 2 ) and carefully pry out the insert.
• Remove the fuse housing (
→
Fig. 6- 5 ) along with the fuses (
→
Fig. 6- 4 ) .
• Replace the defective fuses, reinsert the fuse housing in the instrument and press down until it snaps
into place (with an audible click).