Leica DNA 10 User Manual Download Page 82

Page: 82 / 158

Typical measurement display of
Line points (B/ F)

DNA-Dde 38

Heading

Displays the method (here BF) with even and
uneven station.

2. row

The arrow marks the station (here the even station)
and within the station the next measurement that
will be made (here B).

St.4

Displays the current station number, starting with 1.

PtID

PtID of next aiming (can only be edited in foresight).

Rem

Remarks to the next measurement (optional).

dH T

Total height difference between currrent backsight
and starting point.

Height of the current backsight point.

TBal

Total current distance compensation between all
back and foresights.

BF BF

LINE LEV
ST.4
PtID: 3
Rem :

------

dH T: 1.0179 m
H : 427.1299 m
TBal: 4.20 m
<END> <CL> <LAST> QC

Summary of Contents for DNA 10































































































































































Search results

Summary of Contents for DNA 10

Reviews:

Related manuals for DNA 10

Brands by name

Popular brands

Leica DNA 10, User Manual

Search results

Summary of Contents for DNA 10

Reviews:

Related manuals for DNA 10

Brands by name

Popular brands