Leica DNA 10, User Manual

Page: 128 / 158

128
Target point
PtID = Point number
E = Coordinate (Eastings)
N = Coordinate (Northings)
H = Height
Rem = Remarks
Date = Date
Time = Time
Station
No = Running station number
dH = Height difference
H = Foresight point height
DBal = Distance balance
DTot = Total distance
DSta = Station distance
Date = Date
Time = Time
StatDif = Station difference
Σ
StatDif = Accumulated station difference
B1 - B2 = Difference double sighting (backsight)
F1 - F2 = Difference double sighting (foresight)
Set out results
Diff (dH, H, D) = Set out result
Measurement mode and corrective
parameter
These data blocks are stored at the beginning of a
new line, even when a setting is changed during a
measurement.
Measurement mode
Mode = Measurement mode
n = Preset amount of measurements (2-99)
for mean and median modes
n min = Minimum preset amount of
measuremenrs for "Mean s"
mode.
n max = Maximum preset amount of
measuremenrs for "Mean s"
mode.
sDevM/20m=Preset standard deviation of "Mean s"
mode.
Corrective parameter
Earth curv= Earth curvature correction
yes/ no
Collim.Err= Collimation error