Leica DNA 10 User Manual Download Page 69

Page: 69 / 158

Code

This function permits a code to be entered
Two entry modes are available:

Select a code from the code list. A code would
have to be stored in the instrument. If no code
list is stored then the second mode is
automatically suggested.

Enter a code manually.

Call up the "Code" function. A check is made to

see if a code list is stored in the instrument.

Example

Code entered manually (no code list available):

DNA-Dde 22

Entries on page 1:

Code and info 1-4

Entries on page 2:

Info 5-8

<REC>

The code is stored but not placed in

the code list.

For more information see section

Coding.

CODE & ATTR ENTRY 1/2

Code :

------

Info1:    ------
Info2:    ------
Info3:    ------
Info4:    ------
<QUIT> <REC>

Summary of Contents for DNA 10































































































































































Search results

Summary of Contents for DNA 10

Reviews:

Related manuals for DNA 10

Brands by name

Popular brands

Leica DNA 10, User Manual

Search results

Summary of Contents for DNA 10

Reviews:

Related manuals for DNA 10

Brands by name

Popular brands