Leica D-LUX 6 Page 214 Instructions Manual Download

Page: 214 / 222

Miscellaneous

Q&A Troubleshooting

- 214 -

TV, computer, printer (continued)

The camera does not communicate with the computer.

●

The connection is incorrect

(→190)

●

Check whether computer has recognized the camera.

→ Set [USB Mode] to [PC]

(→39)

→ Turn the camera off and then on again.

The computer does not recognize the card (only reads the built-in memory).

●

Disconnect the USB cable and reconnect with a card inserted.

The computer does not recognize the card. (When using an SDXC memory card)

→ Check whether your computer is compatible with SDXC memory cards.

→ A message prompting you to format the card may appear when you connect it. Do not format the

card.

→ If the [Access] indicator on the monitor does not go off, turn off the camera’s power before

disconnecting the USB cable.

Printing does not work in spite of the connection to a printer.

●

The printer is not compatible with PictBridge.

●

Set [USB Mode] to [PictBridge(PTP)]

(→39)

The edges of pictures are cut off when printing.

●

Erase any trimming or edgeless printing settings on the printer before printing.

(Consult the printer’s instructions.)

●

The aspect ratio of the pictures is different from that of the paper used for printing.

→ If printing in a shop, check if 16:9 sizes can be printed.

Panorama pictures are not printed properly.

●

The aspect ratio of panorama pictures is different from that of regular still pictures, and therefore

some panorama pictures may not be printed correctly.

→ Use a printer with support for panorama pictures. (Refer to the printer’s instructions.)

Summary of Contents for D-LUX 6































































































































































































































Search results

Summary of Contents for D-LUX 6

Reviews:

Related manuals for D-LUX 6

Brands by name

Popular brands

Leica D-LUX 6, Instructions Manual

Search results

Summary of Contents for D-LUX 6

Reviews:

Related manuals for D-LUX 6

Brands by name

Popular brands