Leica D-LUX 6 Page 166 Instructions Manual Download

Page: 166 / 222

Playback

Different playback methods [Playback Mode]

- 166 -

•For the setting procedures of the menu.

(→25)

[Slide Show]

This mode automatically plays pictures in order and to music. It can prove to be helpful,

e.g. when viewing on TV screen.

Use cursor buttons to select the playback method and then

press [MENU/SET]

[All]

Plays back all pictures.

[Picture Only]

Plays back still pictures.

[Video Only]

Plays back motion pictures.

[3D Play]

Plays back 3D still pictures recorded using [3D Photo Mode] Scene

Mode only.

[Category Selection]

Plays back motion or still pictures depending on the set category.

(Select the category with cursor buttons and then press [MENU/SET].)

(→168)

[Favorite]

Play back pictures set as [Favorite].

(→177)

Use cursor buttons to set playback effects and then press

[MENU/SET]

[Effect] (For selecting music and effects according to picture atmosphere)

[AUTO] (only available with [Category Selection] setting) / [NATURAL] / [SLOW] / [SWING] /

[URBAN] / [OFF]

[Setup]

[Duration]

[1 SEC.] / [2 SEC.] / [3 SEC.] / [5 SEC.]

[Repeat]

[ON] / [OFF]

[Sound]

[AUTO]: With still pictures, music will play back, and with motion pictures,

audio will play back.

[Music]: Music effect will play back.

[Audio]: Audio is played back from motion pictures.

[OFF]: Music and audio will not be played back.

This effect can be set only when [Effect] is set to [OFF]. Note, however, that the [Duration]

setting will not be effective in the following cases.

•With motion pictures

•With panorama pictures

•With still picture groups taken sequentially with a [ ] or [ ] exposure series setting or a

time lapse series

(Continued on the next page)

Summary of Contents for D-LUX 6































































































































































































































Search results

Summary of Contents for D-LUX 6

Reviews:

Related manuals for D-LUX 6

Brands by name

Popular brands

Leica D-LUX 6, Instructions Manual

Search results

Summary of Contents for D-LUX 6

Reviews:

Related manuals for D-LUX 6

Brands by name

Popular brands