Leica D-LUX 6 Page 208 Instructions Manual Download

Page: 208 / 222

Miscellaneous

Q&A Troubleshooting

- 208 -

Battery, power

The camera does not work even if the power is turned on.

●

The battery is not inserted correctly

(→18)

, or needs recharging.

The monitor switches itself off even if the power is turned on.

The camera switches itself off as soon as the power is turned on.

●

[Opt. Viewfinder] is set to [ON].

→ Press the [DISP] button to switch to the monitor display.

●

An external viewfinder display is selected.

→ Press the [EVF/LCD] button of the external electronic viewfinder to switch to the monitor display.

●

[Economy] ([Sleep Mode] or [Auto LCD Off]) is activated.

(→36)

→ Press the shutter button halfway to release.

●

The battery needs recharging.

The camera switches itself off automatically.

●

If you connect to a TV compatible with HDTV Link (HDMI) with the HDMI mini cable (available as

accessory

(→8)

) and turn off the power on the TV with its remote control, the power on the camera

also turns off.

→ If you are not using HDTV Link (HDMI), set [HDTV Link] to [OFF].

(→40)

Recording

I cannot record pictures.

●

The built-in memory/the card is full.

→ Free space by deleting unwanted pictures

(→163)

The recorded pictures look white.

●

The lens is dirty (fingerprints, etc.).

→ Turn on power to extend the lens barrel, and clean the lens surface with a soft, dry cloth.

●

The lens is foggy

(→6)

The recorded pictures are too bright/too dark.

●

Adjust the exposure

(→124)

●

[Min. Shtr Speed] is set to fast speed. Check the setting

(→141)

Several pictures are taken when I press the shutter button just once.

●

The following functions are set.

[Burst Shooting]

(→118)

[WB Bracket]

(→114)

[Aspect Bracket]

(→122)

[Auto Bracket]

(→125)

The focusing is not correct.

●

The camera is not set to mode appropriate for the distance to the subject. (The focusing range

varies according to recording mode.)

●

The subject is outside of the focusing range.

(→96, 102)

●

This may be caused by camera shake or subject movement.

(→142)

The recorded pictures are blurred. The Optical Image Stabilizer ineffective.

●

The shutter speed is slower in dark locations and the Optical Image Stabilizer is less effective.

→ Hold the camera firmly with both hands, keeping the arms close to the body.

●

Use a tripod and the self-timer

(→116)

when using slower shutter speeds with [Min. Shtr Speed].

Summary of Contents for D-LUX 6































































































































































































































Search results

Summary of Contents for D-LUX 6

Reviews:

Related manuals for D-LUX 6

Brands by name

Popular brands

Leica D-LUX 6, Instructions Manual

Search results

Summary of Contents for D-LUX 6

Reviews:

Related manuals for D-LUX 6

Brands by name

Popular brands