Leica AutoStainerXL Instructions For Use Manual Download Page 35

Page: 35 / 50

Leica AutoStainer XL – Automated slide stainer

4. Press

[F1]

Unload.

Open the lid and remove the rack.

5. Press

[F1]

Done.

6. Repeat steps 2 to 5 to remove other completed racks.

5.9.7 Interrupting staining

The staining can be interrupted to:

•

edit a program not currently being used for staining,

•

change the general instrument

SetUp

parameters,

•

allow access to the instrument to check/change reagents,

•

abort staining of one more racks.

To interrupt staining:

1. Press

[F4]

Pause

to return to the

Abort

screen.

If staining is interrupted, immersion times during

Pause

will

not be identical to those in the chosen program(s).
If no racks are loaded then the Main Menu will be displayed.

2. To abort a rack, refer to page 35 or

3. Press

[F1]

Stain

to continue staining, or

4. Press

[F4]

Main Menu

to return to the

Main Menu.

You may now edit programs not currently in use or change the instru-
ment

SetUp

parameters.

To resume staining, press

[F1]

from the

Main Menu

Operation

Summary of Contents for AutoStainerXL



















































Search results

Summary of Contents for AutoStainerXL

Reviews:

Related manuals for AutoStainerXL

Brands by name

Popular brands

Leica AutoStainerXL, Instructions For Use Manual

Search results

Summary of Contents for AutoStainerXL

Reviews:

Related manuals for AutoStainerXL

Brands by name

Popular brands