25
Leica AutoStainer XL – Automated slide stainer
5.4.4 Removing blank steps in a program
This function is used to remove blank steps where a program has been ed-
ited by deleting one or more steps. Steps will be sequentially renumbered in
the same sequence as the original program.
1. Select the program (see steps 1 and 2, page 22).
2. Press
[F2]
Edit
.
3. Press
[F1]
More
.
4. Press
[F1]
More
.
5. Press
[F3]
Blank
.
6. If you wish to proceed, press
[F1]
Yes
. The blank steps will be removed
and subsequent steps will be renumbered.
7. To save the program, see page 24.
5.4.5 Saving a program
When the program is complete, to save it permanently:
1. From the
Edit Program
screen, press
[F4]
Quit
. You now have the
options of saving the edited program
[F1],
leaving the program as it
was before the changes were made
[F2],
or continuing editing
[F4]
.
2. Press
[F1]
to save the program, or
3. Press
[F2]
to leave the program unchanged, or
4. Press
[F4]
to continue editing the program.
5.4.6 Deleting a program
This function is used to delete all steps in a program.
1. Select the program (see steps 1 and 2, page 22).
2. Press
[F2]
Edit
.
3. Press
[F1]
More.
4. Press
[F1]
More.
5. Press
[F2]
Delete.
6. If you wish to proceed, press
[F1]
Yes
.
7. To save the program (which now contains no steps), see above.
5.
Operation
