Leica apMK12, Operation & Installation Manual

Page: 132 / 218

Version 1.5 119
Configuration Operation & Installation Manual
Operation - General Setup and Control Settings
This screen controls a few basic operating settings:
Remember Display: When set to Yes (default), the receiver remem-
bers the Page Number or screen you viewed the last time you
used a particular function. For example, if you normally moni-
tor the
NAV3 display and you decided to look at the PLOT1
screen, the next time you press the NAV function, the receiver
will automatically revert to the NAV3 screen immediately.
If you select No for Remember Display , the receiver will al-
ways display the first page of a function when you press the
function key.
Edit Timeout: You can set the timeout limit between None (de-
fault), or 1 to 10 minutes. If you enter the edit mode on any
screen and have a timeout period other than
None , the receiver
will automatically exit the edit mode if no keys are touched
and the timeout period expires.
Preceding Zeroes : Places zeroes (0s) before directions less than
100° when Yes is selected. For example, 079°. Otherwise di-
rections are shown without the leading zeros when No is se-
lected (default). For example, 79°.
Beeper: If you attempt to perform a key function that is not al-
lowed, you normally hear an Error Tone . This is performed
when the Beeper is set to On (default). If you don’t want to
hear the error or any other keyboard beep, set the Beeper to
Off .
Retain External Alarm: Allows the MK12 to hold the external
alarm while the alarm condition still exist. When Retain ex-
ternal alarm is set to On, the external alarm will normalize
only when the cause of alarm is corrected.
8/13/01, 11:07 AM 119