Leica apMK12, Operation & Installation Manual

Page: 80 / 218

Version 1.5 67
GOTO Operation & Installation Manual
briefly displayed indicating that the active route will be replaced
with the GOTO route.
If you decide you don’t want to continue with this function,
press the
Escape softkey, then select another function key (e.g.
NAV ) and your original route will have been left intact.
Press the RTE function key. You will see two waypoints defined in the
center of the screen.
Waypoint 0, the first waypoint, is your Point of Departure , or the
position you were at when you created the route. The CDU saves and
displays the original coordinates, date and time when you created the
route in Waypoint 0.
Waypoint 0 is displayed in Inverse Video , that is, white characters on
a black background (when in the normal Daylight display mode; see
CFG Lighting ). This indicates that you have already passed this coor-
dinate. The time stamp at the lower portion of the description window,
indicates when the route was created.
To the right of the coordinate window of Waypoint 0 is a bent arrow.
The bend in the arrow is adjacent to the range and bearing between the
waypoint you just passed and the waypoint you are approaching.
Keep in mind that these are the fixed calculated values between these
two coordinates and not the real time changing values that you will
8/13/01, 11:31 AM 67