Leica apMK12, Operation & Installation Manual

Page: 133 / 218

120 Version 1.5
Operation & Installation Manual Configuration
Engineering Display: This enables an expanded series of display
screens in some of the functions. In general, these screens are
used by the technician during troubleshooting or by Leica en-
gineers during development testing. Screens which are relevant
for troubleshooting are described in
Appendix C of this manual.
The default setting is No . If you should enable these screens,
the receiver will automatically turn them off the next time power
is cycled on the unit.
Demonstration Mode: This enables the receiver to function as
though you are under way, even though you are completely
stationary. The default setting is
No . When set to Yes , all three
Traffic Lights will be illuminated, and a D symbol is displayed
in the upper left corner of every display. Generally speaking,
this feature is used by Leica and your dealer for show room or
trade show demonstrations. However, you can use it as a train-
ing tool until you become familiar with the receiver. As a safety
feature, you can not use it to output NMEA 0183 records on
the data ports to test and demonstrate other devices such as
autopilots, chart plotters, and radars. Refer to
Appendix E of
this manual for a full description of the Demonstration Mode .
Organizer - Automated Message Reminders
This screen enables you to program the receiver with up to 25 differ-
ent message reminders (up to 30 characters in length). You can pro-
gram it to alarm for shift changes, log entry intervals, medication in-
tervals, weather fax updates, etc.
Note: When the Organizer alarm is activated, the volt-
age on the Alarm Output Port is also activated. If
you have other devices connected to this port,
you might need to consider what other systems
will be affected when the alarm sounds. Leica
8/13/01, 11:07 AM 120