manualshive.com logo in svg

LEGRAND KEOR T EVO 10-60 KVA, Installation & Operation Manual, Page: 38 / 94

Share
Download
LEGRAND KEOR T EVO 10-60 KVA Installation & Operation Manual Download Page 38

Important Notices!

Thank you for choosing LEGRAND UPS System to supply your Critical Application.

This manual contains important information about commissioning, usage and technical properties of the 

UPS. It also contains safety information for operator and instructions to secure your critical load. Applying 

the recommendation detailed in this manual is necessary to use UPS safely and correctly.

The manufacturer reserves the rights to change the t

echnical specifica

tions 

and design without notice.

LEGRAND reserves the rights to change the information in this document 

without notice. Refer to  

http://ups.legrand.com/

 web site to dowload last 

release and translations.

Units that are labelled with a CE mark comply with the Standard:  EN 62040-1 and EN 62040-2. 

Read the manual completely before working on this equipment!

Keep this manual in UPS’s front cover’s pocket for easy consultation!

Reproduction,  adaptation,  or  translation  of  this  manual  is  prohibited  without  prior 

written permission of LEGRAND Company, except as allowed under the copyright laws. 

34

34

Figure.6.3.1.4-3

KEOR T EVO 40-60kVA 2x60pcs 7-9Ah BATTERY WIRING DIAGRAM

Summary of Contents for KEOR T EVO 10-60 KVA































































































Reviews:

No comments