LEGRAND 802.11a User Manual Download

Page: 34 / 40

1.17

/ RADIUS SETTINGS

Reauthentication period

In this field, you can specify how often (in
seconds) a wireless client will have to reau-
thenticate.

Authentication server IP address

This is the IP address of the RADIUS server
used for 802.1x client authentication.

Authentication server port

Using this field, you can specify the port on
the RADIUS server.

Shared secret

This field contains the shared secret between
the wireless Access Point and the RADIUS
server to secure RADIUS communications.

Accounting server IP address

This is the IP address of the server managing
wireless clients' accounts.

Accounting server port

Using this field, you can specify the account-
ing port on the accounting server.

Shared secret

This field contains the shared secret between
the wireless Access Point and the accounting
server.

After you have changed the settings on this
page, click on

Apply

to confirm your chang-

es.

USER

GUIDE

FOR

LEGRAND

DUAL

BAND

ACCESS

POINT

The RADIUS webpage allows your AP to delegate authentication to a remote RADIUS server
(using 802.1x port-based authentication).

Summary of Contents for 802.11a









































Search results

Summary of Contents for 802.11a

Reviews:

Related manuals for 802.11a

Brands by name

Popular brands

LEGRAND 802.11a, User Manual

Search results

Summary of Contents for 802.11a

Reviews:

Related manuals for 802.11a

Brands by name

Popular brands