8
1.5
/ IP ADDRESS
USER
GUIDE
FOR
LEGRAND
DUAL
BAND
ACCESS
POINT
AP name
This name will help you to identify your
Access Point.
Allow management access on VLAN
All management/configuration access to the
AP can be restricted to a specific VLAN on the
uplink port.
By default VLANs are disabled, and access to
the management interface is allowed from any
interface.
If necessary, one VLAN on the uplink port can
be selected as the only way to access the
management interface (for this, the VLANs
must first be enabled, see the Ethernet
Interface section).
Note: If VLANs are enabled you can restrict
management/configuration access to a spe-
cific VLAN ID or to the native VLAN.
Dynamically retrieve an IP address (DHCP)
You can use either Dynamic (DHCP) or Static
(use the next IP address) IP addressing to
manage the AP.
By default or after a full reset, the Access
Point is set to use DHCP.
Toggle AUTO-IP in the absence of DHCP
If
Toggle AUTO-IP in the absence of DHCP
is selected, the AP returns to automatic IP
addressing mode (169.254.0.0/16) if no
DHCP server can be found on the network.
Use the following IP address
(An IP address must be unique in your net-
work.
The Netmask, Default gateway
and
DNS
Server
values can be safely copied
from a computer already configured with stat-
ic IP addressing in your network).
IP address
: Enter the static IP address for
your Access Point.
Netmask
: Enter the IP Netmask for your net-
work.
Default gateway
: Enter the default gateway
IP address (used for any traffic beyond the
local network)
DNS server
: Enter your DNS IP address
(optional).
After you have changed the settings on this
page, click on
Apply
to confirm your chang-
es.
