22
23
USER
GUIDE
FOR
LEGRAND
DUAL
BAND
ACCESS
POINT
Associate to VLAN
If VLANs are enabled, you can restrict the
traffic from/to this SSID to a specific VLAN
ID.
Hide SSID
Select this box to prevent the AP from broad-
casting the SSID for this network.
Note: This will force users to enter the SSID
for this wireless network manually on their
computers, and may even prevent some
wireless clients from connecting.
By default this field is not selected.
Beacon interval
Specifies how much time elapses between
two beacon frames sent from the AP.
The default value should be suitable for most
installations.
Ignore broadcast probe
Enable this option to prevent the AP from
responding to broadcast scanning from wire-
less devices (this makes the wireless network
less visible to scanning tools).
DTIM period
(Delivery Traffic Indication
Message)
Specifies at what beacon frequency a DTIM
indication will be included (enables devices in
power save mode to wake up).
The default value of 1 should be suitable for
most installations.
802.11h
Select this option to make the AP comply with
the IEEE 802.11h standard (European stand-
ard on radar avoidance and power saving).
The remaining wireless network fields depend
on the type of encryption selected and are
detailed by encryption type in the following
sections.
WMM
Select this option to activate Quality of
service, which is developed by the Wi-Fi
alliance as a subset of the 802.11e standard
called the Wi-Fi Multimedia (WMM)
specification.
